Aramid-based protection for demanding rope and lifting applications
When strength alone is not enough, material selection becomes a critical engineering decision. For applications where heat, flame behavior, and cut resistance are the determining factors, HMPE-based fabrics have their limits. That is why TP has developed ARMAX™ Fabric: a laminated hybrid fabric built around Aramid, engineered for the environments that only Aramid can withstand.
What is ARMAX™ Fabric?
ARMAX™ Fabric is a laminated hybrid fabric that combines Aramid with polyamide 6.6 fibers. Like TITAN HMPE Fabric, it uses a laminated construction to improve cohesion, durability, and resistance to environmental exposure. The difference is in the fiber: where TITAN uses HMPE for its exceptional strength-to-weight ratio, ARMAX™ uses Aramid for applications where thermal stability, flame resistance, and superior cut performance are the primary requirements.
Para-aramid is one of the most well-established high-performance fiber materials in industrial applications. It delivers high linear strength, very low elongation, excellent dimensional stability under continuous load, and reliable performance across a wide temperature range. Critically, Aramid does not melt, which makes it suitable for heat-exposed environments.
ARMAX™ translates these fiber properties into a laminated fabric construction designed for protective and load-bearing applications in rope, lifting, and rigging.
Where ARMAX™ Fabric is used
ARMAX™ is engineered for applications where one or more of the following conditions apply:
- Elevated operating temperatures or exposure to flame.
- Contact with sharp edges under repeated mechanical stress.
- Chemical environments that require high resistance.
- Safety-critical protective covers, sleeves, or components where predictable long-term performance is essential.
Typical applications include protective sleeves and covers for high-performance ropes and slings, lifting and rigging components in high-heat environments, and protective textile constructions requiring cut resistance combined with structural integrity.
How ARMAX™ and TITAN compare
Both fabrics share the same laminated construction standard and are produced and tested in-house in Germany. The choice between them is straightforward: if the primary performance drivers are strength-to-weight efficiency and abrasion resistance in standard lifting and rope environments, TITAN HMPE Fabric is the right solution. If heat resistance, flame behaviour, or cut performance under load are the determining factors, ARMAX™ is the correct choice.
TP’s approach is always independent. As a processor rather than a fiber producer, TP has no preference for one material over the other. The recommendation is always driven by what the application actually requires.
Available now
ARMAX™ Fabric is available as part of TP’s High-Performance Fabric range. Specifications can be downloaded via the product page. For specific application questions or co-development enquiries, TP’s team is available for direct technical consultation.
View the High-Performance Fabric page and download the ARMAX™ specs.
